Description
Snow Wolf Barrett M82
Stock V2 gearbox shell (Cut for a wraith-x/ugs in the future)
N7 Gen-2 Electro-Pneumatic HPA Engine
Krytac Hop Up
4uad bucking and nub
650mm 6.03 Tightbore
Magpul Moe Grip (Drilled two holes to attach easy to remove)
Clive spring loaded bipod (Attached to a removable rail segment)
Emg Slim Milsim Grip (Cut the beaver tail off to fit)
Amped Hpa PKM IGL (Added after picture)
Matrix 3-9x50 scope
Maxx Trigger
Original Bipod (Not Pictured)
Original Long Outer barrel (Not pictured and is unmodified)
x3 450rd Hi cap mags (1 used, 2 new)
Rifle has been used for one 15 minute game since it was built. Ran .3s in it and can easily hop way heavier rounds (Would suggest it).
Entire front barrel has been modified/replaced with pvc piping, easy to swap back and is fairly solid without any of it being glued together.
Has pipe insulation foam in the rear, around the pipe, and inside the "Silencer" to help dampen any noise but the inner barrel runs almost to the end of the entire build. The silencer has concealment tape on it and is easy to swap back to the painted black pvc. I would suggest tinkering with the settings and using heavier ammo, only setting I adjusted was semi locking it on the fcu, selector is still there so could make it full auto again.
