Description
COST £399 ALL METAL GUN BODY ASG HERA ARMS CQR AR-15 Milspec SSS Edition Rifle, Half-Tan WITH RETAIL BOX NORMAL SIGHTS AND MAGAZINE PLUS FLASH HIDER CAN BE TEST FIRED ON COLLECTION
WILL LAST ALL DAY 2 X 1450MAH 7.4V BATTS NUPROL COST £40 INCLUDED £330 FOR ALL OF THE ABOVE
EXTRAS IF YOU WANT THEM
ADD CAMO BAG EXTRA £30
SITE IS EXPSPENSIVE AS TOP RANGE SPR-200
Vortex Spitfire AR Prism Scope EXTRA £200
ADD ACETECH RGB BI FROST TRACER SILENCER UNIT EXTRA £85 or comes with normal flash hider
Externally the AR-15 is based off a mil-spec variant of the AR-15, and then modified by attaching the modified CQR parts. The rifle is a 1:1 replica of its real steel counter part including all the modified which went into upgrading the rifle. The parts were modified for the AEG edition by ICS based on the original CAD design files created by HERA ARMS to make them highly realistic and ensure the scale was the same.
The fixed Hera Arms CQR stock is very unique, with its P90 esque shape, this thumbhole stock is something rarely seen on an M4 and give the rifle a completely new feel and look. The stock is great for use with slings as it features a left and right QD sling loop mount points, as well as two stock sling bars for more traditional sling systems. The stock's length can also be adjusted using stock spacers which allows you to customise the length of the AR-15 to the perfect required length. To work with an Airsoft AEG the original design has also been modified to accept both batteries and the AEG's motor with no effect on the overall look of the stock.
The Hera Arms CQR grip is something to behold. The grip features a unique shape which offers the user a variety of grip angles to allow for a range of comfortable and stable firing positions. The front of the grip is specially designed to be held with a thumb and finger grip, similar to a P90, which is extremely comfortable hold hold and gives you a strong grip on the AR-15. The grip features multiple textured surfaces for extra grip, and is attached to the weapon via the rails 20mm RIS / RAS rail allowing it to be removed and refitted with ease. Another interesting feature is that the grip itself is actually produced by HERA Arms giving it a high quality finish comparable to the real thing.
The handguard is also based off the original designs, and is a replica of CQR rail. The rail is a four point 20mm RIS / RAS rail which allows for 20mm attachments to be fixed to the handguard, the most common on the market, allowing for a wide range of aftermarket parts to be fitted and used. The top rail lines directly up with the top rail of the receiver creating a full length top rail allowing for the attachment of large sights and scopes as well as complicated setups like a holographic and magnifier. The left and right side of the handguard features a QD Sling loop mount point to allow for the easy attachment of slings, and when used with the stock's QD points you can attach a range of two point slings to make the rifle easier to carry.
Features
Officially licensed HERA ARMS CQR Replica
Built in collaboration with ASG, ICS, HERA ARMS
German designed HERA ARMS CQR Furniture specially engineer to accommodate an Airsoft AEG motor and battery
ICS's proven split gearbox quick-change spring system provides top performance and easy
A free-floating rail system designed using original HERA ARMS 3D CAD files, combined with an all-metal receiver set
The Self-Diagnosis Shooting System from ICS provides intelligent fault detection and full cycle monitoring on both 7.4v and 11.1v LiPo Battery
Licensed and commissioned by ASG
Built and developed by ICS
Original Design created by HERA ARMS
Based on the Mil-Spec AR-15 system
1:1 scale authentically traded replica
Designed using the original CAD files
HERA ARMS CQR front grip
HERA ARMS CQR railed handguard
HERA ARMS CQR stock system
HERA ARMS CQR flash hider
Three round burst mode
Pre-cocking mode
SSS Self Diagnosis System
Low Battery Protection
Thumb hole stock design
Handguard and stock QD mount points
Free floating four point 20mm RIS / RAS Rail mount system
300rnd ICS T-Tactical wheel wound hi-capacity magazine
ICS Triple S / SSS Gearbox System
Built upon the ICS HOG system
Electric Blowback System
Reliable ICS Hop-up system
Mock bolt release which functions as a de-cocking mechanism
Split Gearbox Design
Quick change spring
6.04mm Inner barrel diameter
212mm inner barrel
Stock redesigned to allow AEG motors
Angular surfaced receiver
Ambidextrous charging handle
Flip-up ironsights
Full length top 20mm RIS / RAS rail
Double stock sling bars
Adjustable stock length via spacers
